Quipbase.com - Wanted list by checked date

Browsing equipment wanted

Sort by

Checked date

Equipment name

2010.06.15

Need AC Drive system
Wanted no.: 04753
Info: Need AC drive system for land rig with feed from power grid.

2010.04.27

BOP, Hydril, Annular, WANTED
Wanted no.: 04116
Info: Looking for misc size Hydril Annular BOPs. We purchase these on regular basis. NEEDED

2010.03.08

Centrifuges and Decanters - WANTED
Wanted no.: 04627
Info: Looking for NX 418 and P3400 decanters, Centrifuges AFPX 513 and Westfalia SC 35, 70, 120 and BRPX 417.

2010.02.17

Lay / Pull in system for flexible pipes NEEDED
Wanted no.: 04616
Info: Vertical or Horizontal tensioner system for flexible pipe, vertical tower with 200 MT tensioner capasity.

2010.02.12

Need 10-15 Ton used Delta Flipper Anchors.
Wanted no.: 04614
Info:

2009.12.22

Winch, Skagit RB90, 2 drums
Wanted no.: 04573
Info: NEEDED Skagit RB90 winch with 2 or more drums.

2009.10.19

Flowlines, risers for production, WANTED
Wanted no.: 02780
Info: We have requirements flexible flowlines and dynamic risers for production and water injection, 3 - 10,000 psi, 4", 5", 6"and all lengths.

2009.09.22

Generator End, 2100 KW, 600 Volt, 900 RPM, WANTED
Wanted no.: 04460
Info: Needed Generator Ends, 2100 KW, 600 Volt, 900 RPM, 60 HZ (50 HZ)

2009.09.09

Turntable, Cable Carousel, WANTED
Wanted no.: 04289
Info: We are looking for a Cable Turntable suitable for Cable Layers and Cable Ships, about 20 m dia. for 2000 - 4000 T cable.

2009.08.18

Generators, Compressors, Pumps
Wanted no.: 03387
Info: Gas Compressors, Diesel And Gas Generators, Pumps, Wanted

2009.05.05

Swivels, Drilling
Wanted no.: 01153
Info: Looking for swivels, 250 T, 350T, 400 T, 500 T or 650 Tons or larger, prefer National or Oilwell type.

2009.04.30

Sub Surface Buoys Needed
Wanted no.: 04304
Info: Needed 100-500 kg Sub Surface Buoys

2009.04.14

Winch, Windlass 3" /76 mm NEEDED
Wanted no.: 04303
Info: Need chain windlass for 3" / 76 mm chain, direct electric drive or hydraulic drive with certs.

2009.04.07

Riser, RCK, Cameron, WANTED
Wanted no.: 04131
Info: We are looking for 7 each Cameron RCK riser 5/8" wall, 50 ft with 10K psi C/K lines and float elements.

2009.04.03

Lifeboats, Tanker version, WANTED
Wanted no.: 04292
Info: Looking For Tanker version Lifeboats, 24 - 70 men, NEEDED

2009.03.20

Crane, Offshore, 600-800 T WANTED
Wanted no.: 04280
Info: URGENTLY NEEDED Offhsore pedestal crane 600-800 ton

2009.03.17

Connector, H4 and Collet
Wanted no.: 00085
Info: Looking to buy Collet- or H4- Connectors, Cameron, Vetco, National or other brand. Buy outright as is condition.

2009.03.17

Riser Tensioners wanted
Wanted no.: 00509
Info: Looking for Drilling Riser Tensioners and Guideline Tensioners, Shaffer, Rucker or other brand, single or double 80K, 160K and 320K.

2009.03.17

Casing, tools 14" and 24"
Wanted no.: 00738
Info: 500 Ton Varco or BJ Casing Tools, Elevators/spiders and Slips as well as 350 Ton Tools.

2009.03.17

Elevators/spiders, for casing
Wanted no.: 01105
Info: Looking to purchase Varco 14" Type SL - 500 tons casing elevators/spiders. With slip assemblies.

2009.03.17

Jack Up, 3 legs, up to 100m Depth water drilling, 2000 HP Rig
Wanted no.: 02849
Info: Looking for Jack Up, 3 legs, up to 100m Depth water drilling, 2000 HP Rig, refurbished and ready to work or needed repair

2009.03.17

Lifeboats wanted
Wanted no.: 02921
Info: Looking For Second Hand Lifeboats, 20 to 30 feet, diesel engine. Need low price located Europe.

2009.03.17

Drawworks, 1000 - 3000 HP
Wanted no.: 02990
Info: We are generally looking to buy drawworks, electric or mechanical type, range from 1000 HP to 3000 HP.

2009.03.17

Crane, offshore, 100-200 ton lift, 12-25 metres WANTED
Wanted no.: 03262
Info: Crane, offshore, 100-200 ton lift, 12-25 metres, with auxiliary line, preferrably active heave compensated

2009.03.17

Compressors, air, seismic, WANTED
Wanted no.: 03745
Info: Need LMF air Compressors, suitable for seismic service, Pressure 2000 - 3000 psi. Drive: electric up to 1000 kW each

2009.03.17

Connector, H4, 18-3/4", WANTED
Wanted no.: 03798
Info: We need 1 each Vetco Gray 18 3/4" E or 18 3/4" ExF H4 Connector, with certification (or as is)

2009.03.17

Winch, Skagit, 2, 3 or 4 drum, WANTED
Wanted no.: 03824
Info: Need skagit winch or other brands with 2-3 or four deum waterfall hoist, with or without power, running or not.

2009.03.17

BOP, 18-3/4" 15K singel with 10-3/4" Ram, WANTED
Wanted no.: 03868
Info: 1 ea single BOP, 18-3/4" 15K with 10-3/4" Ram, for use onshore.

2009.03.17

Reel for flowlines / umbilicals, ca 9 m diameter, WANTED
Wanted no.: 03956
Info: Looking for large diameter Reels for Flowline, Riser and Umbilicals. Reels dimensions approx. 9 x 5 m

2009.03.17

Kongsberg Dynamic Positioning Console, WANTED
Wanted no.: 03985
Info: We are looking to buy 1 ea Konsberg Dynamic Positiong Console for training senter

2009.03.17

Slipjoint, Reagen, FC8, WANTED
Wanted no.: 04121
Info: Looking for Reagan slipjoint FC8 for marine riser system. NEEDED

2009.03.17

Wire, rope, 92mm, WANTED
Wanted no.: 04179
Info: Looking to buy teel wire rope 92 mm, or other larger sizes. NEEDED

2009.03.16

Transformer, 440V/690V, WANTED
Wanted no.: 04267
Info: Looking for 1 each el. Transformer around 1000 - 1500 KVA.

2008.11.09

Brake, Baylor 6032, 7040 and 7838, WANTED
Wanted no.: 02986
Info: We are looking for drawworks brakes of type Baylor Elmagco, Model 6032, Model 7040 and Model 7838.

2008.11.09

Motor, DC, GE752, WANTED
Wanted no.: 04069
Info: We are looking for electric DC Traction Motors, Model G.E.752, typically used on drillling rigs, of any condition.

2008.11.09

Motor, AC, GE B22 / B20, WANTED
Wanted no.: 04070
Info: We are looking for electric AC Traction Motors, Model G.E.B22 and B20, typically used on drillling rigs, of any condition.

2008.01.21

Hose, Coflexip, ID3" -4", 10K, 45 to 90 ft,
Wanted no.: 03300
Info: Need Coflexip Hose 5-10 K, 45-90 ft long, ID 3"-4", API flange or API hub. URGENT

2007.11.19

Need Pipe Handling Equipment
Wanted no.: 03740
Info: Looking for suitable pipe-handling equipment for handling pipes of max 40 inches OD) for our barge

2007.11.07

BOP, 21 1/4" 5000 psi Urgent need
Wanted no.: 03719
Info: Looking To Buy a 21-1/4" 5k,BOP and 29-1/2" Hydril or 30" Sphericals

2007.08.16

Compensators, drill string, Shaffer, Wanted
Wanted no.: 03617
Info: Need 1 ea inline drillstring compensator, Shaffer 600K / 500K, 25 feet stroke or a 400K, 18 feet stroke compensator.

2007.07.03

Bored Pipe Drilling Machine
Wanted no.: 03576
Info: Bored Pipe Drilling Equipment

2007.07.03

Hq And Nq Complete Core Barrels
Wanted no.: 03577
Info: We Need The Complete (head Assembly, Inner Tube And Outer Tube Components) Core Barrels

2007.06.01

Lifeboats wanted
Wanted no.: 03539
Info: Looking For Harding Lifeboats of any condition with engine

2007.05.14

Rotary table, 49 1/2"
Wanted no.: 03521
Info: We are looking to purchase a complete 49 1/2" Rotary table with bushings. Any condition.

2007.04.23

BOP, 20 3/4" / 21 1/4" - 2000 / 3000 psi
Wanted no.: 01252
Info: Looking for 20 3/4" / 21 1/4" - 2000 / 3000 / 5000 psi Ram BOP'S, Cameron. Buy outright as is condition.

2007.04.23

Diverter, 29 1/2", 500 psi
Wanted no.: 01253
Info: Looking for 29 1/2" 500 psi Diverters, Hydril or Shaffer. Buy outright as is condition.

2007.04.23

BOP, 13 5/8" 10000psi CIW
Wanted no.: 01446
Info: Need 1 ea. 13 5/8" 10000 psi BOP Stack, Cameron Type "U". Hubbed or flanged. Buy outright "as is" condition.

2007.04.23

Connector, 18 3/4" H4 HD
Wanted no.: 02121
Info: want to buy Vetco 18 3/4" H4 Style HD (or other brand) with 4 mm ft.lbs bending moment capacity.

2007.04.23

BOP, 18 3/4", 15000 psi Subsea stack URGENT
Wanted no.: 03362
Info: NEED URGENTLY BOP, 18 3/4", 15000 psi Subsea stack

Pages: 12 3 Next >>(109 listings)